The organic fertiliser production process is mainly the fermentation part and the production granulation part. Even if the raw materials for organic fertilizers are better fermented, granulation is also difficult, because the characteristics of organic raw materials are rough raw materials, lighter, and lower bonding rate. Different organic materials have different characteristics. Therefore, when selecting equipment, you should be taken carefully. Otherwise, it will not only affect the output, but also the appearance of the finished product will not reach the required perfection.
The key factors that need to pay attention to when choosing the equipment:
Fermentation methods, organic raw materials, mechanization, annual production. The inherent quality of organic fertilizers is good or bad mainly depends on the fermentation part and product formulation. The key factors in the fermentation part are: microorganisms, carbon-nitrogen ratio, carbon-phosphorus ratio, moisture, pH, and aeration control. If one of the factors is not controlled properly, it will result in non-fermentation, incomplete fermentation, or a long fermentation time. Organic and inorganic compound fertilizer product formulations and inorganic fertilizers also need to be based on different soils, and different crop formulations are also different. If the fermentation is well-formulated, the effect is better than the inorganic fertilizer, the cost is low, and the fertilizer is green. It can also improve the environment in which the plants live and the soil pillarization.