Menu
Blog

What are the types of organic fertilizer granulation equipment? How to treat straw and turn waste into treasure

2022/08/08
 

China is the largest agricultural production country in the world. The planting industry produces about 700 million tons of crop stalks every year, which is a large amount of sustainable and valuable resources. If comprehensive utilization is carried out, it can not only turn waste into treasure, protect the ecological environment, but also promote the sustainable development of agricultural production. However, more than 60% of crop straws have not been effectively treated and utilized, which not only wastes resources, but also causes serious air pollution due to the burning of a large number of straws in the open air, and causes fire and other social problems affecting the operation safety of highways and civil aviation. Whether straw can be effectively treated and utilized is one of the major resource and environmental problems faced by rural areas in China. Therefore, it is urgent to find new ways of utilization.

Organic fertilizer granulation equipment:

Extrusion granulator: when the moisture content of compost is 20% ~ 30%, it will enter the granulator and be extruded into cylindrical particles to help you realize mechanized fertilization. The mold cost is high and the granulation is simple.

Disc granulator: the principle of the granulation method for the production of inorganic compound fertilizer is used. However, due to the water content of compost, it is difficult to agglomerate into granules due to the coarse particle size, many fibers and many agglomerations. Small equipment, low production capacity, about 30000-50000 yuan.

Rotary drum granulator: both with disc granulation are of the pellet method, with a large volume, up to 10 m, large capacity: the smallest is 3 T / h, and the price is more expensive: about 100000 yuan.

Counter roll granulator: the key structure is the roller and mold. The belt and pulley are driven by the motor and transmitted to the driving shaft through the reducer. The split gear works synchronously with the driven shaft. The materials are added from the feed hopper, extruded by the pair of rollers, demoulded and pelletized, and sent to the crushing screen through a pair of chain drives.

Products
Tel
contact
inquiry